Einleitung
This guide will help you to replace the speakers if you are experiencing audio issues.
Was du brauchst
-
-
Place Gamepad face down and remove the two 4.7 mm screws with a Phillips size #00 screwdriver.
-
-
-
With your finger, press down and pull back on the battery connector plug.
-
Remove the battery from the battery case.
-
-
-
-
Remove 10 9mm screws with Tri-Wing size Y1 screwdriver around the outer case.
-
Lift up on the back of case.
-
-
-
Unplug outer case rumble motor connector from the motherboard with your fingers.
-
-
-
With your fingers, unplug the left speaker cable from the motherboard.
-
-
-
Remove the right speaker cable that's connected to the motherboard with the tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
6 weitere Nutzer:innen haben diese Anleitung absolviert.