Zum Hauptinhalt wechseln

WowWee MiP Robot Battery Replacement

Was du brauchst

  1. WowWee MiP Robot Battery Replacement, Battery: Schritt 1, Bild 1 von 2 WowWee MiP Robot Battery Replacement, Battery: Schritt 1, Bild 2 von 2
    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

  2. WowWee MiP Robot Battery Replacement: Schritt 2, Bild 1 von 2 WowWee MiP Robot Battery Replacement: Schritt 2, Bild 2 von 2
    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Moira Keahon

Mitglied seit: 09/24/14

257 Reputation

3 Anleitungen geschrieben

Team

University of Maine, Team 1-50, Diaz Fall 2014 Mitglied von University of Maine, Team 1-50, Diaz Fall 2014

UMAINE-DIAZ-F14S1G50

3 Mitglieder

6 Anleitungen geschrieben

11 Kommentare

Its a programmer MIP not this kind.

Azariah Trumble - Antwort

Same question here, instructions needed for CODER MIP as it doesn't seem to be a holding a charge.

Gil Acosta - Antwort

does spare battery adapter vailable(not reachargeable)

coolboyz' channel - Antwort

Coder Mip Battery says fully charged - but Coder Mip doesnt turn on?

Sadie - Antwort

Coder MiP one day old - was working - battery says fully charged - but Coder MiP doesn’t turn on? Any suggestions?

Sadie - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 13

Letzte 30 Tage: 40

Insgesamt: 12,284