Einleitung
The WowWee MiP robot has a tendency towards short battery life. If the MiP seems too slow or stops responding, use this guide to change the MiP’s batteries. The MiP’s batteries are located in a battery pack on the robot's back.
Was du brauchst
-
-
-
Carefully pull the battery pack from the robot.
-
Remove the batteries from the battery pack.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
University of Maine, Team 1-50, Diaz Fall 2014 Mitglied von University of Maine, Team 1-50, Diaz Fall 2014
UMAINE-DIAZ-F14S1G50
3 Mitglieder
6 Anleitungen geschrieben
11 Kommentare
Its a programmer MIP not this kind.
Same question here, instructions needed for CODER MIP as it doesn't seem to be a holding a charge.
does spare battery adapter vailable(not reachargeable)
Same CODER MIP here - we got erratic performance from the battery pack. A smart slap seems required to ensure a tight battery connection after a robot fall, otherwise it appears to have run out of battery. Not optimal, but it allowed us to play for a while.
My Mip doesn’t work even if I replace the batteries. It acts very strange. It keeps making a clicking noise
Mine does to
I have A Coder MiP instead of a plain MiP
Are there different instructions.
