Zum Hauptinhalt wechseln

Xbox 360 Wireless Controller Tasten tauschen

Was du brauchst

  1. Xbox 360 Wireless Controller Tasten tauschen, Batterie: Schritt 1, Bild 1 von 2 Xbox 360 Wireless Controller Tasten tauschen, Batterie: Schritt 1, Bild 2 von 2
    • Drücke den Knopf am Batteriefach oben am Controller.

    • Entferne das Batteriefach vom Controller.

    • In der normalen Konfiguration verfügt der Xbox 360 Wireless-Controller über AA-Batterien. Eine aufladbare Batterie ist separat erhältlich, aber beide Optionen werden in der gleichen Weise vom Controller entfernt.

  2. Xbox 360 Wireless Controller Tasten tauschen, Rückwärtiges Gehäuse: Schritt 2, Bild 1 von 1
    • Benutze eine Pinzette, um den Barcode-Aufkleber aus dem Batteriefach abzulösen.

  3. Xbox 360 Wireless Controller Tasten tauschen: Schritt 3, Bild 1 von 1
    • Entferne die sieben 9,3 mm T8 Security Torx Schrauben, welche das rückwärtige Gehäuse an das vordere befestigen.

    Any recommendation on which set of Security Torx tools to use? I've already purchased 2 kits, one of those being sold as "Xbox controller tools" but the diameter of the head does not fit the hole on the controller and that's critical for the 2 screws on the bottom. The tools must obviously be thinner in diameter and long enough to get there.

    Arnie - Antwort

    How to open an XBOX 360 controller without a special screwdriver. http://www.instructables.com/id/How-to-o... Works perfectly.

    Louis - Antwort

    A lot of thanks for your comment. It's very usefull

    Echedey -

    I picked up a handy torx key set from Auto Zone. Was about $10, no lose driver bits. has both sizes you need to repair the controller and the console. Here's the link:

    http://www.autozone.com/autozone/accesso...

    FierDancr - Antwort

    It doesn't really matter which set of bits you by or what brand makes them, Torx bits (and the security versions of them) are generic & come in standardized sizes. You do not need a special "xbox" tool kit, you just need a size 8 torx security bit, no matter what brand makes the bit/kit. Those types of "specialty kits" are usually just collections of generic bits that you can buy at a hardware store in a regular bit set. The difference is that a general bit set will have bits for screws that a specific item doesn't have in it, whereas a specialty kit will only include bits for the types & sizes of fasteners used in the specified item.

    BTW, with the smaller sizes of torx security bits you can try breaking off the little post in the middle with needlenose pliers or something else that can fit in the there. Even if the post doesn't break off cleanly, it's usually short enough to fit a regular (non security) torx bit in the slot.

    Nerfbomb - Antwort

  4. Xbox 360 Wireless Controller Tasten tauschen: Schritt 4, Bild 1 von 2 Xbox 360 Wireless Controller Tasten tauschen: Schritt 4, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Spudger
    $2.99
    Kaufen
    • Führe einen Spudger zwischen rückwärtigem und vorderem Gehäuseteil entlang der linken Kante des Controllers ein.

    • Drehe den Spudger in Richtung der Vorderseite des Controllers, um die beiden Gehäuseteile voneinander zu trennen.

  5. Xbox 360 Wireless Controller Tasten tauschen: Schritt 5, Bild 1 von 2 Xbox 360 Wireless Controller Tasten tauschen: Schritt 5, Bild 2 von 2
    • Führe einen weiteren Spudger zwischen das rückwärtige und das vordere Gehäuse, nahe des Kopfhöreranschlusses, ein.

    • Drehe den Spudger in Richtung der Vorderseite des Controllers, um die beiden Gehäuseteile voneinander zu trennen.

  6. Xbox 360 Wireless Controller Tasten tauschen: Schritt 6, Bild 1 von 2 Xbox 360 Wireless Controller Tasten tauschen: Schritt 6, Bild 2 von 2
    • Halte den Controller am Batteriefach und am Kopfhöreranschluss.

    • Hebe das Batteriefach weg vom Kopfhöreranschluss und trenne so das rückwärtige Gehäuse vom vorderen Gehäuse sowie dem Logic Board.

    • Die Federn, welche den Kontakt zu den Batterien herstellen, werden durch Slots im Batteriefach an ihrem Platz gehalten. Gehe sicher, dass du diese beim Zusammenbau wieder richtig zusammensteckst!

    The RB / LB bar will fall away easily as you handle the upper case and logic board; just be prepared for it.

    knoxco - Antwort

    Good information

    mazvilaa640 - Antwort

  7. Xbox 360 Wireless Controller Tasten tauschen, Vibrationsmotoren: Schritt 7, Bild 1 von 2 Xbox 360 Wireless Controller Tasten tauschen, Vibrationsmotoren: Schritt 7, Bild 2 von 2
    • Hebe das Kabel des Vibrationsmotors mit dem flachen Ende eines Spudger aus dem Anschluss auf dem Logic Board nach oben und trenne es ab.

    • Hebe den Vibrationsmotor aus dem vorderen Gehäuse heraus.

  8. Xbox 360 Wireless Controller Tasten tauschen: Schritt 8, Bild 1 von 2 Xbox 360 Wireless Controller Tasten tauschen: Schritt 8, Bild 2 von 2
    • Entferne auf gleiche Weise den Vibrationsmotor von der anderen Seite des Controllers.

    • Der rechte Motor hat deutlich mehr Schwungmasse als der linke.

    The opposite was true for the controller I just opened. It was the left motor counterweight (as you hold the controller normally) which had more weight. Perhaps it doesn't matter which goes where?

    Bob S - Antwort

    For anyone reading this in the future, it does matter. The way you had them originally is the correct way.

    Yado Nada -

  9. Xbox 360 Wireless Controller Tasten tauschen, Logic Board: Schritt 9, Bild 1 von 2 Xbox 360 Wireless Controller Tasten tauschen, Logic Board: Schritt 9, Bild 2 von 2
    • Fasse das Logic Board an der Kopfhörerbuchse und Versorgungsbuchse an, hebe es hoch und entferne es vom vorderen Gehäuse.

    What if you're having difficulty taking the logic board out?

    Xander Uchida - Antwort

    In my experience with my controller, the logic board lifts out very easily, there are no tabs or fasteners holding it in.

    So, if you're having difficulty taking the logic board out, call a friend with average hand dexterity & motor skills to do it for you.

    Nerfbomb - Antwort

    If the controller is a bit old, the center plastic screw holder might have swollen and will need a little stenght to release the logic board.

    RoFixedIt - Antwort

  10. Xbox 360 Wireless Controller Tasten tauschen, Tasten: Schritt 10, Bild 1 von 1
    • Entferne die Gummimatte von der Rückseite der Eingabetasten.

  11. Xbox 360 Wireless Controller Tasten tauschen: Schritt 11, Bild 1 von 2 Xbox 360 Wireless Controller Tasten tauschen: Schritt 11, Bild 2 von 2
    • Entferne die Tasten mit einer Pinzette vom vorderen Gehäuse:

    • A-Taste

    • B-Taste

    • X-Taste

    • Y-Taste

    • Start-Taste

    • Auswahltaste

    • Guide-Taste

  12. Xbox 360 Wireless Controller Tasten tauschen: Schritt 12, Bild 1 von 1
    • Hebe den LED Ring des Home Buttons mit einer Pinzette aus dem vorderen Gehäuse des Controllers heraus.

    • Bei allen Tasten sind Laschen angebracht, die in entsprechende Schlitze im vorderen Gehäuse passen. Dadurch können die Tasten nicht falsch eingesetzt werden.

Abschluss

Um dein Gerät wieder zusammenbauen, folge den Schritten in umgekehrter Reihenfolge.

60 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Brett Hartt

Mitglied seit: 04/12/10

127.749 Reputation

143 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Staff

136 Mitglieder

16.560 Anleitungen geschrieben

3 Kommentare

Hello I have had an Xbox for about 1-2years and everything has been working fine until the A button on one of my controllers stopped working I don't think it has gunk or anything because I can press it down and it comes back up just that when I press it in screen nothing happens but the other buttons work fine

Saul Escalon - Antwort

Thank you for the teardown! My cat has just vomitted on my joystick…. I could have cleaned it now! I appreciate it , thanks…

Nathan St-Onge - Antwort

Has anyone ever replaced the spring contacts in the logic board???

BJ Robbins - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 4

Letzte 7 Tage: 33

Letzte 30 Tage: 164

Insgesamt: 70,379