Repariere deine Sachen Community Store

Xbox One Elite Controller (Model 1698) Daughterboard Replacement

Was du brauchst

  1. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Show me the Screws!: Schritt 1, Bild 1 von 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Show me the Screws!: Schritt 1, Bild 2 von 2

    • You can remove the side panels with a pry tool.

    • You don't need to remove the rubber. The rubber on this controller was already bad

    Bearbeiten

  2. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Removing the back panel screws: Schritt 2, Bild 1 von 1

    • Remove the 5 Torx Security Bit (TR9) screws

    Bearbeiten

  3. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: Schritt 3, Bild 1 von 3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: Schritt 3, Bild 2 von 3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: Schritt 3, Bild 3 von 3

    • Pry the panel next to the 3.5mm port

    • Be careful to not rip the ribbon shown in the next step

    Bearbeiten

  5. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Warning Carefully remove the ribbon: Schritt 4, Bild 1 von 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Warning Carefully remove the ribbon: Schritt 4, Bild 2 von 2

    • Be careful to not rip the ribbon cable

    • You can pop the connector up to remove the ribbon easily

    • Ribbon Cable

    Bearbeiten

  6. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Screws on controller motherboard: Schritt 5, Bild 1 von 1

    • Remove the 2 Torx (T6) screws

    Bearbeiten

  7. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Desolder wires from motherboard: Schritt 6, Bild 1 von 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Desolder wires from motherboard: Schritt 6, Bild 2 von 2

    • Desolder the 4 wires on each side, these control the vibrations and the RT LT

    Bearbeiten

  8. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the motherboard: Schritt 7, Bild 1 von 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the motherboard: Schritt 7, Bild 2 von 2

    • Pull up from the "top" side of the controller on the sister board.

    Bearbeiten

  9. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: Schritt 8, Bild 1 von 3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: Schritt 8, Bild 2 von 3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: Schritt 8, Bild 3 von 3

    • Be Careful to not lose the sync button

    • Pry the middle section up from the home button side.

    • This will also remove the LB and RB which is a single part

    Bearbeiten

  10. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the controller daughterboard: Schritt 9, Bild 1 von 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the controller daughterboard: Schritt 9, Bild 2 von 2

    • Unscrew the 6 Torx (T6) screws

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 3 anderen Mitwirkenden

EasyAsABC123

Mitglied seit: 01/22/10

2.407 Reputation

5 Anleitungen geschrieben

Auszeichnungen: 25

+ 22 weitere Auszeichnungen

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 19

Letzte 30 Tage: 84

Insgesamt: 8,304