Was du brauchst
-
-
-
You can pop the connector up to remove the ribbon easily
-
Ribbon Cable
-
-
-
Desolder the 4 wires on each side, these control the vibrations and the RT LT
-
-
-
Pull up from the "top" side of the controller on the sister board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
9 weitere Nutzer:innen haben diese Anleitung absolviert.