Zum Hauptinhalt wechseln

Einleitung

This step covers how to remove the plastic case of the Xbox One S All Digital Edition (Model 1681). This is a necessary step to repair anything inside the Xbox. Be aware, this step may require some force if the plastic case has not been removed before, and there is a chance some parts of it break. Popping out the tabs inside the black cover may take some time. Disconnect all cables prior to disassembly.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Position the iFixit Opening Tool's riveted edge  in between the top and bottom cover of the plastic enclosure. Apply downward pressure on the iFixit Opening Tool until the security clip unlocks. Repeat on different points of the plastic enclosure until the bottom cover is removed.
    • Position the iFixit Opening Tool's riveted edge in between the top and bottom cover of the plastic enclosure.

    • Apply downward pressure on the iFixit Opening Tool until the security clip unlocks.

    • Repeat on different points of the plastic enclosure until the bottom cover is removed.

  2. Remove the six 50 mm green screws (labeled F1-F6) from the metal chassis using a Torx 10 screwdriver. These screws hold the top cover of the plastic enclosure to the chassis.
    • Remove the six 50 mm green screws (labeled F1-F6) from the metal chassis using a Torx 10 screwdriver.

    • These screws hold the top cover of the plastic enclosure to the chassis.

  3. Apply pressure to peel off the sides of the casing. Separate the metal chassis from the  top cover, lifting the back of the chassis up and away from the top cover.
    • Apply pressure to peel off the sides of the casing.

    • Separate the metal chassis from the top cover, lifting the back of the chassis up and away from the top cover.

    • The plastic back panel is meant to stay attached to the metal chassis.

  4. Flip the metal enclosure so that the fan cover is on top.
    • Flip the metal enclosure so that the fan cover is on top.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Jules Hajjar

Mitglied seit: 10.10.2019

1.150 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team S12-G6, Regan Fall 2019 Mitglied von Cal Poly, Team S12-G6, Regan Fall 2019

CPSU-REGAN-F19S12G6

4 Mitglieder

24 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 16

Letzten 30 Tage: 60

Insgesamt: 835