Zum Hauptinhalt wechseln

Xbox One S All Digital Edition Power Supply Replacement

Was du brauchst

  1. Xbox One S All Digital Edition Power Supply Replacement, Plastic Enclosure: Schritt 1, Bild 1 von 3 Xbox One S All Digital Edition Power Supply Replacement, Plastic Enclosure: Schritt 1, Bild 2 von 3 Xbox One S All Digital Edition Power Supply Replacement, Plastic Enclosure: Schritt 1, Bild 3 von 3
    • Position the iFixit Opening Tool's riveted edge in between the top and bottom cover of the plastic enclosure.

    • Apply downward pressure on the iFixit Opening Tool until the security clip unlocks.

    • Repeat on different points of the plastic enclosure until the bottom cover is removed.

  2. Xbox One S All Digital Edition Power Supply Replacement: Schritt 2, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement: Schritt 2, Bild 2 von 2
    • Remove the six 50 mm green screws (labeled F1-F6) from the metal chassis using a Torx 10 screwdriver.

    • These screws hold the top cover of the plastic enclosure to the chassis.

  3. Xbox One S All Digital Edition Power Supply Replacement: Schritt 3, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement: Schritt 3, Bild 2 von 2
    • Apply pressure to peel off the sides of the casing.

    • Separate the metal chassis from the top cover, lifting the back of the chassis up and away from the top cover.

    • The plastic back panel is meant to stay attached to the metal chassis.

  4. Xbox One S All Digital Edition Power Supply Replacement: Schritt 4, Bild 1 von 1
    • Flip the metal enclosure so that the fan cover is on top.

  5. Xbox One S All Digital Edition Power Supply Replacement, Top Metal Shield: Schritt 5, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement, Top Metal Shield: Schritt 5, Bild 2 von 2
    • Remove the two 15mm screws from the front panel using the Torx T8 screwdriver.

  6. Xbox One S All Digital Edition Power Supply Replacement: Schritt 6, Bild 1 von 3 Xbox One S All Digital Edition Power Supply Replacement: Schritt 6, Bild 2 von 3 Xbox One S All Digital Edition Power Supply Replacement: Schritt 6, Bild 3 von 3
    • Carefully slide the top metal case off the frame.

    • This may require shifting the case side to side as you slide up.

  7. Xbox One S All Digital Edition Power Supply Replacement, Wifi Card: Schritt 7, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement, Wifi Card: Schritt 7, Bild 2 von 2
    • Remove the three 15 mm screws with the Torx T8 Security Bit Screwdriver.

    • The top of the metal chassis has been removed in the picture, but is not necessary for the replacement.

  8. Xbox One S All Digital Edition Power Supply Replacement: Schritt 8, Bild 1 von 1
    • Carefully remove the WiFi Card from the metal chassis.

  9. Xbox One S All Digital Edition Power Supply Replacement, IR Blaster: Schritt 9, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement, IR Blaster: Schritt 9, Bild 2 von 2
    • Remove the four 15mm screws attaching the IR Blaster to the metal chassis with the Torx T8 Security screwdriver.

  10. Xbox One S All Digital Edition Power Supply Replacement: Schritt 10, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement: Schritt 10, Bild 2 von 2
    • Carefully remove the IR Blaster from the metal chassis.

    • The connector is very fragile. Make sure you pull the board away from the case and not sideways.

  11. Xbox One S All Digital Edition Power Supply Replacement, Bottom Metal Shield: Schritt 11, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement, Bottom Metal Shield: Schritt 11, Bild 2 von 2
    • Remove the eight 10mm screws from the bottom of the metal casing using the Torx T9 screwdriver.

    • Remove the four 15mm screws from the bottom of the heatsink fastener using the Torx T8 screwdriver.

  12. Xbox One S All Digital Edition Power Supply Replacement: Schritt 12, Bild 1 von 3 Xbox One S All Digital Edition Power Supply Replacement: Schritt 12, Bild 2 von 3 Xbox One S All Digital Edition Power Supply Replacement: Schritt 12, Bild 3 von 3
    • Remove the two plastic pieces from the motherboard.

  13. Xbox One S All Digital Edition Power Supply Replacement: Schritt 13, Bild 1 von 3 Xbox One S All Digital Edition Power Supply Replacement: Schritt 13, Bild 2 von 3 Xbox One S All Digital Edition Power Supply Replacement: Schritt 13, Bild 3 von 3
    • Lift the motherboard up from the metal chassis.

    • The motherboard should easily separate from the metal chassis.

  14. Xbox One S All Digital Edition Power Supply Replacement, Power Supply: Schritt 14, Bild 1 von 3 Xbox One S All Digital Edition Power Supply Replacement, Power Supply: Schritt 14, Bild 2 von 3 Xbox One S All Digital Edition Power Supply Replacement, Power Supply: Schritt 14, Bild 3 von 3
    • Gently lift the hard drive to free up some space around the power supply.

  15. Xbox One S All Digital Edition Power Supply Replacement: Schritt 15, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement: Schritt 15, Bild 2 von 2
    • Lift the power supply up and away from the motherboard.

  16. Xbox One S All Digital Edition Power Supply Replacement: Schritt 16, Bild 1 von 2 Xbox One S All Digital Edition Power Supply Replacement: Schritt 16, Bild 2 von 2
    • Disconnect the six pin connector from the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Jules Hajjar

Mitglied seit: 10/10/19

1.531 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team S12-G6, Regan Fall 2019 Mitglied von Cal Poly, Team S12-G6, Regan Fall 2019

CPSU-REGAN-F19S12G6

4 Mitglieder

25 Anleitungen geschrieben

3 Kommentare

I replaced the power supply and my Xbox still isn't turning on. I used a power supply I got from this website. Please help

William Oliver - Antwort

Another issue could be the power button on the front power board. If possible, you could try to replace that as well.

Jules Hajjar -

replace the PSU and still boots up and shuts off

imafuxer - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 25

Letzte 30 Tage: 129

Insgesamt: 6,594