Zum Hauptinhalt wechseln

Xbox One Wireless Controller Faceplate Replacement

Was du brauchst

  1. Xbox One Wireless Controller Faceplate Replacement, Battery Pack: Schritt 1, Bild 1 von 1
    • Remove the battery pack cover.

    • Remove batteries.

  2. Xbox One Wireless Controller Faceplate Replacement, Side Handles: Schritt 2, Bild 1 von 2 Xbox One Wireless Controller Faceplate Replacement, Side Handles: Schritt 2, Bild 2 von 2
    • We recommend using a nylon spudger for this step. A metal spudger is shown.

    • Grip the controller firmly to remove the side handles, wedging a spudger into the seam between the front and handle plates.

    • Pry the side plate away from the front plate by moving the spudger back and forth. You will need to do this all the way around the side plate's seam.

  3. Xbox One Wireless Controller Faceplate Replacement, Screws: Schritt 3, Bild 1 von 2 Xbox One Wireless Controller Faceplate Replacement, Screws: Schritt 3, Bild 2 von 2
    • There is a hidden screw located in the middle of the controller behind the label.

    • Use a screwdriver and punch a hole directly in the center of the label.

    • You may also lift the label if you do not want to puncture it.

    • Remove the five 10mm screws located on the back of the controller using the T8 Security Torx Screwdriver.

  4. Xbox One Wireless Controller Faceplate Replacement, Backplate: Schritt 4, Bild 1 von 1
    • Remove the backplate.

  5. Xbox One Wireless Controller Faceplate Replacement, Faceplate: Schritt 5, Bild 1 von 1
    • Remove the faceplate.

Abschluss

To reassemble your device, follow these instructions in reverse order.

87 weitere Nutzer:innen haben diese Anleitung absolviert.

Tommy

Mitglied seit: 01/22/15

1.909 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 20-15, Maness Winter 2015 Mitglied von Cal Poly, Team 20-15, Maness Winter 2015

CPSU-MANESS-W15S20G15

5 Mitglieder

50 Anleitungen geschrieben

11 Kommentare

It was a good tutorial, but i have two plastic rings that stay after my instervention... Anyone knows where are-they ?

Matis Begot - Antwort

It was a good tutorial, but i have two plastic rings that stay after my instervention... Anyone knows where are-they ?


laurito andrea12 -

Note before starting. You need a T8 security bit (with a hole in the middle), not a standard T8 bit.

Fraser Currie - Antwort

I took mine a part because it was looking dirty, gave it a good clean, putting it back together was easy but it wont work with the batteries anymore just the power core, there is nothing broken or cracked, any ideas?

Lee - Antwort

Maybe you forced the battery contact on the wrong side of the case?

Alexandre Foley -

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 20

Letzte 7 Tage: 210

Letzte 30 Tage: 934

Insgesamt: 236,559