Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

This guide offers instructions on how to replace cracked or split trigger caps in the Xbox One Wireless Controller (model 1708).

Trigger caps are pressable controls that often vibrate to provide feedback during gameplay. A cracked or split trigger cap will get jammed and will prevent the trigger motor from performing its intended function.

This guide is intended for trigger cap replacement only.

Before using this guide, examine the plastic trigger caps for any noticeable exterior damage. If you can see the trigger motors beneath the caps, this is the guide for you.

Make sure you have the proper tools and parts for this replacement and make sure your device is turned off before you begin.

  1. Slide the battery cover out and  remove it. Remove the battery pack.
    • Slide the battery cover out and remove it.

    • Remove the battery pack.

  2. Insert a plastic opening tool between the handle and the plate. Gently slide the opening tool from the top end to the bottom end of the seam to remove the plate from the handle. Repeat the process with the other side plate.
    • Insert a plastic opening tool between the handle and the plate.

    • Gently slide the opening tool from the top end to the bottom end of the seam to remove the plate from the handle.

    • Repeat the process with the other side plate.

    • The plate is tightly sealed on the handle, so it may be difficult to remove.

  3. Remove the five 2.3mm screws on the bottom plate with a T8 Torx Screwdriver. If there is a sticker on the back, poke a hole with the screwdriver to get to the fifth screw.
    • Remove the five 2.3mm screws on the bottom plate with a T8 Torx Screwdriver.

    • If there is a sticker on the back, poke a hole with the screwdriver to get to the fifth screw.

  4. Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen

    Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen
  5. Remove the bottom plate. Remove the bottom plate.
    • Remove the bottom plate.

  6. Carefully turn over the controller with the front plate facing you. Remove the front plate. Remove the front plate.
    • Carefully turn over the controller with the front plate facing you.

    • Remove the front plate.

  7. Remove the two 1.7mm screws from each of the triggers with a T6 Torx screwdriver. It is best to do one trigger cap replacement at a time. It is best to do one trigger cap replacement at a time.
    • Remove the two 1.7mm screws from each of the triggers with a T6 Torx screwdriver.

    • It is best to do one trigger cap replacement at a time.

  8. Be careful not to let the trigger motor inside come out. Lift the trigger cap off the trigger motor. Lift the trigger cap off the trigger motor.
    • Be careful not to let the trigger motor inside come out.

    • Lift the trigger cap off the trigger motor.

  9. Place the new trigger cap on the trigger motor. Push down the inside of the trigger cap until you hear a click. Repeat step six to eight for the other trigger cap.
    • Place the new trigger cap on the trigger motor.

    • Push down the inside of the trigger cap until you hear a click.

    • Repeat step six to eight for the other trigger cap.

Abschluss

To reassemble your device, follow steps 1-5 in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Team

UC Davis, Team S1-G6, Andersen Winter 2020 Mitglied von UC Davis, Team S1-G6, Andersen Winter 2020

UCD-ANDERSEN-W20S1G6

3 Mitglieder

1 Anleitung geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 11

Letzten 7 Tage: 87

Letzten 30 Tage: 450

Insgesamt: 1,155