Einleitung
Use this guide to replace the speaker in your Xiaomi Air 12.
Was du brauchst
-
-
Orient the computer so the Xiaomi logo is at the bottom of the device.
-
-
-
Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.
-
-
-
Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.
-
-
-
-
Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.
-
-
-
Remove the white and black speaker wires from the black tabs by pulling upwards from the device.
-
-
-
Gently pull the speaker connector out from the connection point using your hand.
-
-
-
Remove the left speaker module by pulling the panel up from the device.
-
Repeat the same process for the right speaker module.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
6 Kommentare
have you found them? i need those too
Hello, i love this laptop and its been my companion for almost 3 years think the audio input jack got grounded because i heard a creaking sound when i inserted a metallic headset jack, the device was charging when it happened. Now the audio output from the audio jack port is like a minus one or somewhat instrumental. Any suggestions what to do?
Left speaker not working so i need a replacement part. Wrote to xiaomi but no answer yet.
Hello,
I have a problem on my Mi air 12 , specifically with the lcd cable port on the mother board. I want to replace it but i can’t seem to find where to buy the parts.
Pleas help me
Kind regards
L.
lanusjeleus - Antwort