Ersatzteile

Kein Ersatzteil erforderlich.

Using a spudger, remove the back panel of the phone.
  • Using a spudger, remove the back panel of the phone.

Kommentar hinzufügen

Remove the battery and SD card from the phone. Remove the battery and SD card from the phone.
  • Remove the battery and SD card from the phone.

Kommentar hinzufügen

Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.
  • Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.

Kommentar hinzufügen

Remove the back piece, exposing the motherboard.
  • Remove the back piece, exposing the motherboard.

Kommentar hinzufügen

Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place.
  • Flip up the three small tan clips holding the ribbons in place.

Kommentar hinzufügen

Gently slide each of the three ribbons out of the motherboard.
  • Gently slide each of the three ribbons out of the motherboard.

Kommentar hinzufügen

Slide the motherboard off of the ribbons detaching it from the front of the phone.
  • Slide the motherboard off of the ribbons detaching it from the front of the phone.

Excelente gráfica,gran aporte

Juan - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Lilia Johnson

Mitglied seit 08.10.2014

583 Reputation

2 Anleitungen geschrieben

Team

USF Tampa, Team 9-5, Leahy Fall 2014 Mitglied von USF Tampa, Team 9-5, Leahy Fall 2014

USFT-LEAHY-F14S9G5

3 Mitglieder

5 Anleitungen geschrieben

Zte blade a506 insert sim card problem

Ali Jaffar - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 17

Letzte 30 Tage: 74

Insgesamt: 2,695