Einleitung

Follow this guide to replace the volume buttons on a ZTE Lever smartphone.

  1. Remove the SD card and the Sim card from the device.
    • Remove the SD card and the Sim card from the device.

    • The Sim and SD cards are not shown here as our device did not come with them.

  2. Use an plastic opening tool to separate the back from the device.
    • Use an plastic opening tool to separate the back from the device.

    • Remove the two 1.6mm Phillips #0 screws from the battery plug cover.

    • Remove the cover.

    • Disconnect the battery cable from the motherboard with a plastic opening tool.

    • Use your hands, or a plastic opening tool, to pry the battery from the phone.

    • Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.

    • Remove the top plastic motherboard cover using a plastic opening tool.

    • Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket.

    • Peel up the volume button cable from the phone with hands, or plastic opening tool.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Michael Gonzalez

Mitglied seit 29.01.2018

445 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team S5-G2, Passmore Spring 2018 Mitglied von USF Tampa, Team S5-G2, Passmore Spring 2018

USFT-PASSMORE-S18S5G2

3 Mitglieder

6 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 28