Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

ZTE Quest n817 Camera Replacement

Was du brauchst

  1. ZTE Quest n817 Camera Replacement, Battery: Schritt 1, Bild 1 von 3 ZTE Quest n817 Camera Replacement, Battery: Schritt 1, Bild 2 von 3 ZTE Quest n817 Camera Replacement, Battery: Schritt 1, Bild 3 von 3
    • Ensure that the phone is turned off before starting.

    • Orient the device so that the inset on the right side of the device is facing you.

    • Insert the spudger into the inset and carefully remove the back panel.

  2. ZTE Quest n817 Camera Replacement: Schritt 2, Bild 1 von 2 ZTE Quest n817 Camera Replacement: Schritt 2, Bild 2 von 2
    • Use the ribbon to remove the exposed battery.

  3. ZTE Quest n817 Camera Replacement, Motherboard: Schritt 3, Bild 1 von 1
    • Use the JIS #000 screwdriver to remove the six 3.0mm screws placed in the back of the ZTE Quest.

  4. ZTE Quest n817 Camera Replacement: Schritt 4, Bild 1 von 1
    • Carefully pry open the back panel with the plastic opening tool.

  5. ZTE Quest n817 Camera Replacement: Schritt 5, Bild 1 von 1
    • Use a pair of tweezers to gently disconnect the ribbon cable connector from its socket.

  6. ZTE Quest n817 Camera Replacement: Schritt 6, Bild 1 von 1
    • Pull back the tape encasing the brown ribbon cable connector.

    • Remove the ribbon cable from its socket.

  7. ZTE Quest n817 Camera Replacement: Schritt 7, Bild 1 von 1
    • Unplug the flat-top connector by using a pair of tweezers to pry up each side before removing the connector from its socket.

  8. ZTE Quest n817 Camera Replacement: Schritt 8, Bild 1 von 2 ZTE Quest n817 Camera Replacement: Schritt 8, Bild 2 von 2
    • Disconnect the coaxial connector in the bottom right corner of the motherboard.

  9. ZTE Quest n817 Camera Replacement, Camera: Schritt 9, Bild 1 von 1
    • Flip the motherboard over and find the camera’s flat-top connector.

    • Gently pry up each side of the connector with a pair of tweezers before fully removing it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Eric Loureiro

Mitglied seit: 10/26/18

582 Reputation

5 Anleitungen geschrieben

Team

UMass Dartmouth, Team S3-G6, Peak Fall 2018 Mitglied von UMass Dartmouth, Team S3-G6, Peak Fall 2018

UMASSD-PEAK-F18S3G6

3 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 235