Einleitung
Use the following guide to replace the rubber roller of the ZP 505 with just your bare hands.
-
-
Orient the printer so the front is facing you.
-
Locate the two tabs on opposite ends of the printer.
-
Place your fingers on the rollers, push outward and lift upwards.
-
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team S8-G2, Banghart Fall 2017 Mitglied von Cal Poly, Team S8-G2, Banghart Fall 2017
CPSU-BANGHART-F17S8G2
4 Mitglieder
10 Anleitungen geschrieben
