Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
The Zoom Q3HD is a handy video/audio recording device released in 2010 How to clean the lens from inside
Was du brauchst
-
-
Flip the device over and remove the four screws bordering the grate of the device.
-
-
-
On the front of the device, slide the battery compartment cover off by pushing inward and sliding downward.
-
-
-
-
Run the pry tool along the edges of the device to begin separating the device in two halves.
-
-
-
Gently flip the black clip up attaching the ribbon of the screen to the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Ohio State, Team 1-1, Mccook Fall 2014 Mitglied von Ohio State, Team 1-1, Mccook Fall 2014
OSU-MCCOOK-F14S1G1
4 Mitglieder
1 Anleitung geschrieben
3 Kommentare
My zoom q3HD only have the red light turned on when powering up. No display at all. What is happening? How can I claim warranty? I didn't use the device more than a year. Help me
Yes it would be good to see it finished. I am half way through taking mine apart to clean the lens amd i don't know if i should proceed or not. Its the 2nd time the lens has fogged up. My 2nd q3hd.
