Zum Hauptinhalt wechseln

Zoomer Jurassic World Indominus Rex Back Cover Replacement

Was du brauchst

  1. Zoomer Jurassic World Indominus Rex Back Cover Replacement, Back Cover: Schritt 1, Bild 1 von 1
    • Turn off and unplug Zoomer Jurassic World Indominus Rex from any power source before doing replacements.

    • Remove all eight (8) 9.3mm Phillips screws using Phillips #1 screwdriver.

  2. Zoomer Jurassic World Indominus Rex Back Cover Replacement: Schritt 2, Bild 1 von 2 Zoomer Jurassic World Indominus Rex Back Cover Replacement: Schritt 2, Bild 2 von 2
    • Pry apart the back cover of the Jurassic Indominus Rex and the rest of the body using a spudger.

    • Do not take out the back cover immediately as it it still attached to the motherboard by a wire.

  3. Zoomer Jurassic World Indominus Rex Back Cover Replacement: Schritt 3, Bild 1 von 2 Zoomer Jurassic World Indominus Rex Back Cover Replacement: Schritt 3, Bild 2 von 2
    • Disconnect the orange wire that connects the motherboard and the back cover.

    • Separate the back cover and the rest of the Zoomer Jurassic World Indominus Rex.

    • Gently press the tab on the side of the orange connector if you are having trouble disconnecting the wire.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Anh Le

Mitglied seit: 01/20/16

504 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team 10-3, Remmell Spring 2016 Mitglied von USF Tampa, Team 10-3, Remmell Spring 2016

USFT-REMMELL-S16S10G3

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 5

Insgesamt: 378