Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an 2010 Subaru Forester P0026 Fault - RH Oil Switching Solenoid Valve and RH Oil Pressure Switch Replacement Einleitung

Bearbeitet von James -

Bearbeitung genehmigt von James

Vorher
Nachher
Unverändert
Introduction
Other causes of the P0026 fault code include dirty oil and filters. The wiring could also be the cause. However if you have decided that the cause of the problem isn’t either of those, it is recommended that you start by changing the Oil Pressure Switch only because it is significantly cheaper than the solenoid. If you don’t want to take any chances or didn’t time to fault find like me, I just replaced both (that’s what my local Subaru mechanic does as they don’t want call backs). [ … ] The two components that are being replaced here are the RH Oil Switching Valve Solenoid and the Variable Valve lift Diagnosis Oil Pressure Switch. [ … ] From all reports, The same part number solenoid and switch are located on the left hand bank 2 of the engine. So you have the option of swapping the parts over and seeing if the fault transfers over causing a different fault code. [ … ] Naturally the OEM solenoid costs a small fortune in Australia about $230.00 the switch about $70.00. [ … ] Buy them online if you can! Amazon has them. [ … ] Solenoid part number 10921AA040 Oil Pressure Switch part number 25240AA060
Difficulty
Moderate
Easy

Werkzeuge

  • OBD Scanner x1 added.
  • 24mm 1/2" Drive Deep Socket x1 added.
  • 10mm Deep Socket x1 added.