Zum Hauptinhalt wechseln

Änderungen an Wire Stripping Einleitung

Bearbeitet von Paul Ringelstein -

Bearbeitung genehmigt von Paul Ringelstein

Vorher
Nachher
Unverändert
Introduction
Wire needs to be exposed from its insulation in order for you to be able to solder parts back together. Wire stripping exposes the wire for you to be able to make necessary connections when wires break.
Time Required Min
1 Minute
Time Required Max
3 Minuten
Conclusion
To reassemble your device, follow these instructions in reverse order.
After your wire has been stripped, the exposed wire is ready to be soldered and reconnected to other parts of the microphone.
Summary
This guide will help expose wire that can be be used to solder and reconnect any broken connection in the microphone.