Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Skateboard Skateboard Trucks Replacement Einleitung

Bearbeitet von Jared Stine -

Bearbeitung genehmigt von Jared Stine

Vorher
Nachher
Unverändert
Gerät
SkateboardSkateboards
SkateboardSkateboards
Thing
Truck InstallationSkateboard Trucks
Truck InstallationSkateboard Trucks
Title
Installing Skateboard TrucksTruck Installation
Installing Skateboard TrucksTruck Installation
Introduction
[ ]Be sure that you have installed grip tape on your board before installing your skateboard trucks. If you have not, please see the [guide|10825|Grip Tape Application] guide. Also be aware of the type of hardware you have. This will decide whether you need an Allen Wrench or a Phillips Head Screwdriver.
Time Required Min
15 Minuten
Time Required Max
25 Minuten
Difficulty
Moderate
Easy
Conclusion
To reassemble uninstall your device, trucks, simply follow these instructions steps in reverse order. order. To continue assembling your skateboard deck, see the [http://www.ifixit.com/Guide/Wheel+Installation/11243/1|Wheel Installation] guide.
To reassemble uninstall your device, trucks, simply follow these instructions steps in reverse order. order. To continue assembling your skateboard deck, see the [http://www.ifixit.com/Guide/Wheel+Installation/11243/1|Wheel Installation] guide.
Summary
trucks onto for your skateboard.
trucks onto for your skateboard.

Werkzeuge

  • 3/16" Wrench x1 added.
  • Hex/ Allen wrench x1 added.
  • Phillips #1 Screwdriver x1 added.

Ersatzteile

  • Skateboard Truck x2 added.
  • Set of Hardware x1 added.