Repariere deine Sachen Community Store

Einleitungsverlauf: How to configure "Client Mode" on TP-Link TL-WR802N

Bearbeitet von Headset Adapter Co –

Bearbeitung genehmigt von Headset Adapter Co

Vorher
Nachher
Unverändert
Gerät
TP-Link TL-WR802N
Type
technique
Title
How to configure "Client Mode" on TP-Link TL-WR802N
Introduction
We have upgraded our wireless system, and suddenly a few devices stopped working over WiFi. These are locked PCs that have TP-Link TL-WR802N (version 2.0) to connect a copper Ethernet client to the WiFi network. I was impressed with a router, except it still was not working, when followed vendor instructions. The user manual is very simple (and it should be): (1) Reset router to factory default, (2) Use step-by-step wizard to configure “client mode”, (3) Enjoy... Except it was not working. PC behind the router was not receiving DHCP, and end up with 169.x.x.x address.
Time Required Min
Keine Schätzung
Time Required Max
Keine Schätzung
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Headset Adapter Co
Public
Nein

Kennzeichnungen

  • In Progress added.
  • Community-Contributed Guide added.