Zum Hauptinhalt wechseln

Änderungen an MiTM Pressure Washers CA2703HDHB1 2017 Recoil Starter Replacement Einleitung

Bearbeitet von Arthur Shi -

Bearbeitung genehmigt von Arthur Shi

Vorher
Nachher
Unverändert
Gerät
MiTM Pressure Washers CA2703HDHB1 2017
Type
replacement
Thing
Starter Recoil
Title
MiTM Pressure Washers CA2703HDHB1 2017 Starter Recoil Replacement
Introduction
This guide shows how to remove and replace the entire recoil starter assembly. The assembly is an OEM part for Honda GX200 engine models.
'''If you replace the recoil starter with a non-OEM part, you may have to remove the starter cap.''' For that, you will need the following additional tools:
* 3/4” deep socket
Time Required Min
Keine Schätzung
Time Required Max
Keine Schätzung
Imageid
Vorher
Nachher
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Nein
Summary
Remove and replace the starter recoil assembly for the MiTM CA2703 pressure washer.

Werkzeuge

  • 10mm Socket x1 added.
  • 1/4" Drive Ratchet x1 added.

Ersatzteile

  • recoil starter x1 added.

Kennzeichnungen

  • In Progress added.

Schritte

Step #: 1
Vorher
Nachher
Step #: 2
Vorher
Nachher
Step #: 3
Vorher
Nachher