Zum Hauptinhalt wechseln

Änderungen an MiTM Pressure Washers CA2703HDHB1 2017 Recoil Starter Replacement Einleitung

Bearbeitet von Miles Robinson -

Bearbeitung genehmigt von Miles Robinson

Vorher
Nachher
Unverändert
Introduction
This guide shows how to remove and replace the entire recoil starter assembly. The assembly is an OEM part for [https://www.ifixit.com/Device/Honda_General_Purpose_Engine_GX200UT2|Honda GX200] engine models.
'''If you replace the recoil starter with a non-OEM part, you may have to remove the starter cap.''' For that, you will need the following additional tools:
* 3/4” deep socket