Zum Hauptinhalt wechseln

Änderungen an American Sanders EZSand Orbital Sander 07163A 2012 Sanding Disc Replacement Einleitung

Bearbeitet von Miles Robinson -

Bearbeitung genehmigt von Miles Robinson

Vorher
Nachher
Unverändert
Gerät
Clarke Floor Sander 07163A 2012
Type
replacement
Thing
Sanding Disc
Title
American Sanders EZSand Orbital Sander 07163A 2012 Sanding Disc Replacement
Introduction
Use this guide to remove and replace a sanding disc on the Clarke Floor Sander 07163A.
This guide shows the removal of just one disc, but the procedure for the other two discs is the same.
Time Required Min
Keine Schätzung
Time Required Max
Keine Schätzung
Imageid
Vorher
Nachher
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Nein
Summary
Replace a worn-out or damaged sanding disc on your Clarke orbital floor sander.

Grundständige Anleitungen

Werkzeuge

  • 3mm Hex Key x1 added.
  • 6-in-1 Screwdriver x1 added.
  • 11 mm Socket x1 added.
  • Socket Wrench x1 added.
  • 22 mm Thin Wrench x1 added.
  • Pry Bar x1 added.
  • 15/16" Socket x1 added.
  • Snap Ring Pliers x1 added.

Ersatzteile

  • Clarke Pad Foam Driver 11139A x1 added.
  • Clarke DISC SANDING 38734A x1 added.