Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Sanyo SCP-8100 Keypad Replacement Einleitung

Bearbeitet von Irenz Afable -

Bearbeitung genehmigt von Irenz Afable

Vorher
Nachher
Unverändert
Gerät
[ ]Sanyo SCP-8100
Type
[ ]installation
Thing
[ ]Keyboard
Title
[ ]Installing Sanyo SCP-8100 Keyboard
Introduction
In order to replace the keyboard, you will need to unscrew and pry the back panel off of the phone. The keyboard is located underneath the motherboard. [ … ] * '''Note:''' In order to pull out the plug on the back of the phone that is hiding one of the screw, you will need to use a 1.5 mm flat head screwdriver. A spudger or opening tool are too thick to take it out.
Time Required Min
30 Minuten
Time Required Max
45 Minuten
Imageid
Vorher
Nachher
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Nein
Summary
[ ]How to replace the keyboard for the Sanyo SCP-8100.

Grundständige Anleitungen

Werkzeuge

  • Y1 Tri-point Screwdriver x1 added.
  • iFixit Opening Tools x1 added.
  • 1.5 mm Flathead Screwdriver x1 added.

Kennzeichnungen

  • In Progress added.
  • Member-Contributed Guide added.
  • Student In Progress added.

Schritte

Step #: 1
Vorher
Nachher
Step #: 2
Vorher
Nachher
Step #: 3
Vorher
Nachher
Step #: 4
Vorher
Nachher
Step #: 5
Vorher
Nachher
Step #: 6
Vorher
Nachher
Step #: 7
Vorher
Nachher
Step #: 8
Vorher
Nachher
Step #: 9
Vorher
Nachher