Zum Hauptinhalt wechseln

Änderungen an Sanyo VPC S1275 Logic Board Replacement Einleitung

Bearbeitet von Spencer Lillywhite

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert
Introduction
This replacementUse this guide for information on installing a new logic board or re-install the old one. Removing the logic board requires 17 desolders to remove the old logic board and board. To install a new logic board, then 17 resolders for the new board. need to be done. Unless you feel very confident in your soldering abilities, you could end up damaging disassembling the camera much worse. the logic board and not be able to reassemble it. Also, be careful when handling the camera after taking the casing off because the camera's capacitor for the flash can shock you. Use this guide to gain access to and replace the logic board.
This replacementUse this guide for information on installing a new logic board or re-install the old one. Removing the logic board requires 17 desolders to remove the old logic board and board. To install a new logic board, then 17 resolders for the new board. need to be done. Unless you feel very confident in your soldering abilities, you could end up damaging disassembling the camera much worse. the logic board and not be able to reassemble it. Also, be careful when handling the camera after taking the casing off because the camera's capacitor for the flash can shock you. Use this guide to gain access to and replace the logic board.
Public
Nein
Ja