Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Repairing Kenmore Elite HE3 Washer Control Board Relays Einleitung

Bearbeitet von jadeters -

Wartet auf Freigabe

Vorher
Nachher
Unverändert
Title
CleaningRepairing Kenmore Elite HE3 Washer Control Board Relays
CleaningRepairing Kenmore Elite HE3 Washer Control Board Relays
Introduction
The Kenmore Elite HE3 washers will stop their cycle and display an error code if they detect a problem. Two error codes seem prevalent, FDL and F11. FDL indicates a failure of the door lock mechanism. F11 indicates an error in communication with the control board and the front panel. Clearing the error and restarting the cycle may fix the problem temporarily, but is not a permanent fix. [ … ] the relays door latch relay on the control board can become coated with carbon due to excessive arcing. This guide will explain how to access and clean or replace them. the relays.
The Kenmore Elite HE3 washers will stop their cycle and display an error code if they detect a problem. Two error codes seem prevalent, FDL and F11. FDL indicates a failure of the door lock mechanism. F11 indicates an error in communication with the control board and the front panel. Clearing the error and restarting the cycle may fix the problem temporarily, but is not a permanent fix. [ … ] the relays door latch relay on the control board can become coated with carbon due to excessive arcing. This guide will explain how to access and clean or replace them. the relays.
Time Required Min
1 Stunde
Time Required Max
2 Stunden
Difficulty
Moderate
Difficult

Werkzeuge

  • Flathead Screwdriver x1 added.
  • Desoldering Braid x1 added.
  • Solder x1 added.
  • Soldering Iron x1 added.
  • T10 Torx Screwdriver x1 added.