Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Repairing Kenmore Elite HE3 Washer Control Board Relays Einleitung

Bearbeitet von jadeters -

Wartet auf Freigabe

Vorher
Nachher
Unverändert
Gerät
[ ]Kenmore Elite HE3 Washer
Type
[ ]repair
Thing
[ ]Control Board Relays
Title
[ ]Cleaning Kenmore Elite HE3 Washer Control Board Relays
Introduction
The Kenmore Elite HE3 washers will stop their cycle and display an error code if they detect a problem. Two error codes seem prevalent, FDL and F11. FDL indicates a failure of the door lock mechanism. F11 indicates an error in communication with the control board and the front panel. Clearing the error and restarting the cycle may fix the problem temporarily, but is not a permanent fix. [ … ] One problem known to cause the problem is that the relays on the control board can become coated with carbon due to excessive arcing. This guide will explain how to access and clean or replace them.
Time Required Min
Keine Schätzung
Time Required Max
Keine Schätzung
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Nein
Summary
[ ]Cleaning the contacts on the control board relays can fix the FDL and F11 errors.

Kennzeichnungen

  • In Progress added.
  • Member-Contributed Guide added.