Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Richard Suovanen -

Bearbeitung genehmigt von Richard Suovanen

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Remove the five 4mm T4 screws around the battery assembly with a t4 crew driver.
[* orange] Lift the battery assembly and gently pry the plug out of its port on the board below with a iFixitplastic opening tool.
[* yellow] Press the battery from the back of the battery assembly to remove it with the iFixita plastic opening tool until the glue releases the battery.
[* icon_caution] Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.
[* orange] Lift the battery assembly and gently pry the plug out of its port on the board below with a iFixitplastic opening tool.
[* yellow] Press the battery from the back of the battery assembly to remove it with the iFixita plastic opening tool until the glue releases the battery.
[* icon_caution] Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.