Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von K. Niblock -

Bearbeitung genehmigt von K. Niblock

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Removing Covers
-[* red] Remove top cover screws (3) using #6 flat head screw driver
-[* orange] Loosen the 1/4" nuts holding the bar cover in place
+[* red] Remove top cover screws (3) using #6 flat head screw driver on the chainsaw T-wrench
+[* orange] Loosen the 1/4" nuts holding the bar cover in place using the chain saw T-wrench
[* blue] Turn chain tension adjustment screw two turns counter clockwise
-[* orange] Remove nuts holding bar cover in place then remove bar and chain
+[* orange] Remove nuts holding bar cover in place then remove bar
[* yellow] Using 5/32" Allen wrench remove fly wheel cover