Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Haatef Pourmotabbed -

Bearbeitung genehmigt von Haatef Pourmotabbed

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Removing Covers
-[* red] Remove top cover screws (3) using #6 flat head screw driver on the chainsaw T-wrench
-[* orange] Loosen the 1/4" nuts holding the bar cover in place using the chain saw T-wrench
-[* blue] Turn chain tension adjustment screw two turns counter clockwise
-[* orange] Remove nuts holding bar cover in place then remove bar
-[* yellow] Using 5/32" Allen wrench remove fly wheel cover
+[* red] Remove top cover screws (3) using a #6 flat head screw driver on the chainsaw T-wrench.
+[* orange] Loosen the 1/4" nuts holding the bar cover in place using the chainsaw T-wrench.
+[* blue] Turn the chain tension adjustment screw two turns counter clockwise.
+[* orange] Remove the nuts holding the bar cover in place, and then remove the bar.
+[* yellow] Remove fly wheel cover using a 5/32" Allen wrench.