Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Shobhit Dabral -

Bearbeitung genehmigt von Shobhit Dabral

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Flip the device over so that the bottom is face up.
[* redblack] Remove the eight screws that are circled in redshown by rotating them counter-clockwise with a T10T15 Torx screwdriver.
[* red] Two 14 mm Torx screws
[* orange] Two 16 mm Torx screws
[* yellow] Four 21 mm Torx screws
[* redblack] Remove the eight screws that are circled in redshown by rotating them counter-clockwise with a T10T15 Torx screwdriver.
[* red] Two 14 mm Torx screws
[* orange] Two 16 mm Torx screws
[* yellow] Four 21 mm Torx screws

Bild 1

Alte Version

Neue Version