Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von William Burke -

Bearbeitung genehmigt von William Burke

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] To remove the rear-cover, flip the device on its back, and locate the screws around as illustrated *Make sure your device is powered down and unplugged before beginning the replacement.*
-[* black] Use a J0 bit tipped screwdriver to unscrew the 2 6 mm Phillips screws on the back panel.
+[* red] To remove the rear-cover. Flip the device on its back, and locate the screws as illustrated.
+[* icon_note] Use a J0 bit tipped screwdriver to unscrew the two 6 mm Phillips screws on the back panel.
+[* icon_caution] Make sure your device is powered down and unplugged before beginning the replacement.