Änderungen an Schritt Nr. 1

Bearbeitet von Jim Nugent -

Bearbeitung abgelehnt von Arthur Shi

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Opening the joy-con
[* black] Start off by unscrewingRemove the 4 screws aton the back of the Joy-Con using a Tri-Point Y00 Screwdriver.
[* black] Start off by unscrewingRemove the 4 screws aton the back of the Joy-Con using a Tri-Point Y00 Screwdriver.
[* black] '''Carefully''' separate the two halves (be gentle, as you risk damaging the ribbon cables in the joy-con if you're rough with them), and unscrew the one phillips screw holding the rear shell in place.