Änderungen an Schritt Nr. 1

Bearbeitet von Jim Nugent -

Bearbeitung genehmigt von Arthur Shi

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Opening the joy-conJoy-Con
[* black] Start off by unscrewingRemove the 4 screws aton the back of the Joy-Con using a Tri-Point Y00 Screwdriver.
[* black] '''Carefully''' separate the two halves (be gentle, as you risk damagingof the Joy-Con. Be gentle—there are ribbon cables in the joy-con if you're rough with them), and unscrewconnecting them inside.
[* black] Remove
the one phillipssingle #00 Phillips screw holding the rearblack plastic shell in place.
[title] Opening the joy-conJoy-Con
[* black] Start off by unscrewingRemove the 4 screws aton the back of the Joy-Con using a Tri-Point Y00 Screwdriver.
[* black] '''Carefully''' separate the two halves (be gentle, as you risk damagingof the Joy-Con. Be gentle—there are ribbon cables in the joy-con if you're rough with them), and unscrewconnecting them inside.
[* black] Remove
the one phillipssingle #00 Phillips screw holding the rearblack plastic shell in place.