Änderungen an Schritt Nr. 3

Bearbeitet von Jim Nugent -

Bearbeitung genehmigt von Arthur Shi

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Installing the new buckle lock
[* black] First, make sure you havePlace the correctspring into the replacement buckle lock, there are two variants, one withlock. While compressing the slope onspring, slide the right side, and one with the slope on the left side. In the first picture you can see the left and right buckle locks.
[* black] Push the new
buckle lock back into place while putting some pressure on the spring to make sure it won't fly off on you, and putJoy-Con.
[* black] Replace
the metal cover back on, makecover, making sure not to tighten this screw too much, as your release button may get stuckovertighten the screw.
[* black] You can now re-assemble your joy-con(s)Reassemble the Joy-Con.
[* black] First, make sure you havePlace the correctspring into the replacement buckle lock, there are two variants, one withlock. While compressing the slope onspring, slide the right side, and one with the slope on the left side. In the first picture you can see the left and right buckle locks.
[* black] Push the new
buckle lock back into place while putting some pressure on the spring to make sure it won't fly off on you, and putJoy-Con.
[* black] Replace
the metal cover back on, makecover, making sure not to tighten this screw too much, as your release button may get stuckovertighten the screw.
[* black] You can now re-assemble your joy-con(s)Reassemble the Joy-Con.