Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Monica Hurwitz -

Bearbeitung genehmigt von Monica Hurwitz

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* blackred] After prying the coverkeyboard unit off of the backbase, you will see three ribbons connected to the cover andcomponents resting within the componentsbase of the laptop. Simply pullLift the white, hinged covers connected to the white ribbons and pull gently to disconnect.
[* blackorange] Disconnect the black ribbon whichby pulling gently.
[* yellow] When the keyboard unit
is abovedisconnected, lift the hard drivewhite, hinged cover attached to the white ribbon (remember the white ribbon is connected to the USB ports on the right side) and disconnect by pulling gently.
[* icon_note] The ribbons will stay apart ofWhen putting the cover so disconnect them fromlaptop back together, lift the component ofhinged covers and connect the laptopribbons before dropping the hinged covers back down.
[* blackred] After prying the coverkeyboard unit off of the backbase, you will see three ribbons connected to the cover andcomponents resting within the componentsbase of the laptop. Simply pullLift the white, hinged covers connected to the white ribbons and pull gently to disconnect.
[* blackorange] Disconnect the black ribbon whichby pulling gently.
[* yellow] When the keyboard unit
is abovedisconnected, lift the hard drivewhite, hinged cover attached to the white ribbon (remember the white ribbon is connected to the USB ports on the right side) and disconnect by pulling gently.
[* icon_note] The ribbons will stay apart ofWhen putting the cover so disconnect them fromlaptop back together, lift the component ofhinged covers and connect the laptopribbons before dropping the hinged covers back down.