Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Omer Tunagur -

Bearbeitung genehmigt von Omer Tunagur

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] After prying the keyboard unit off of the base, you will see three ribbons connected to the components resting within the base of the laptop. Lift the white, hinged covers connected to the whitethree ribbons shown and pull gently to disconnect.
[* orange] Disconnect the black ribbon by pulling gently.
[* yellow] When the keyboard unit is disconnected, lift the white, hinged cover attached to the white ribbon (remember the white ribbon is connected to the USB ports on the right side) and disconnect by pulling gently.
[* red] After prying the keyboard unit off of the base, you will see three ribbons connected to the components resting within the base of the laptop. Lift the white, hinged covers connected to the whitethree ribbons shown and pull gently to disconnect.
[* orange] Disconnect the black ribbon by pulling gently.
[* yellow] When the keyboard unit is disconnected, lift the white, hinged cover attached to the white ribbon (remember the white ribbon is connected to the USB ports on the right side) and disconnect by pulling gently.
[* icon_note] When putting the laptop back together, lift the hinged covers and connect the ribbons before dropping the hinged covers back down.