Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von charles vanderlick -

Bearbeitung genehmigt von charles vanderlick

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Start by placing the laptop upside down to expose the first set of screws on the bottom of the laptop. Use your J1 Phillips head screwdriver bit to unscrew the 8 size 60 mm screws.
+[* red] Start by placing the laptop upside down to expose the first set of screws on the bottom of the laptop. Use your J1 Phillips head screwdriver bit to unscrew the 8 size 6 mm screws.
[* orange] Remove the plastic cover to unveil the final screw holding the front and back frame together.
-[* yellow] Remove this last screw of size 60mm with the J1 phillips head bit found in the approved iFixit toolkit.
+[* yellow] Remove this last screw of size 6mm with the J1 phillips head bit found in the approved iFixit toolkit.