Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Luis A. Alvarez -

Bearbeitung genehmigt von Luis A. Alvarez

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Start by placing the laptop upside down to expose the first set of screws on the bottom of the laptop. Use your J1 Phillips head screwdriver bit to unscrew the 8 size 60 mm screws.
-[* orange] Remove the plastic cover to unveil the final screw holding the front and back frame together.
-[* yellow] Remove this last screw of size 60mm with the J1 phillips head bit found in the approved iFixit toolkit.
+[* red] Place laptop upside down to observe the first set of screws on the bottom cover. With the J1 Phillips head screwdriver bit, unscrew eight (8) size 60 mm screws.
+[* orange] With a metal spudger, remove the plastic cover to unveil the final screw.
+[* yellow] With the J1 Phillips head bit, remove remaining 60 mm screw.