Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Luis A. Alvarez -

Bearbeitung genehmigt von Luis A. Alvarez



+[* red] Using your metal pry tool slowly pry the two halves apart by moving your metal pry tool around the laptop slowly moving your tool up and down to pry. Once all the way around the top and bottom half will separate.
+[* icon_note] When pulling the laptops apart be careful to hold them together at first due to the sensitive ribbon cable inside.
+[* orange] Use your metal pry tool again to push the holding clip up and remove the ribbon cable.

Bild 1

Kein vorheriges Bild