Änderungen an Schritt Nr. 1
Bearbeitet von Kelly Johnston –
Bearbeitung genehmigt von Kelly Johnston
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* icon_caution] Before starting this guide, please ensure your device is turned off and unplugged to avoid damaging the electronics. | |
| [* black] Turn laptop over. | |
| - | [* red] Unscrew the |
| + | [* red] Unscrew the 07.mm Phillips #0 screws (total of 12 screws) from the back cover of the device. |
| [* black] Using the spudger, gently pry the back cover off of the device. There are several plastic snaps located on the inside of the cover - run the spudger around the perimeter of the cover to open each snap. Once the back cover is fully disconnected from the device, lift the cover off and set aside. |