Skip to main content

Änderungen an Schritt Nr. 1

Bearbeitet von lauren paganella

Bearbeitung genehmigt von lauren paganella

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Lift the battery compartment out of the controller and gently set it outside of the controller.
[* icon_note] Do ++not++ yank, stress, or pull on the wires for removal.
[* greenred] Use the precision tweezers to gently pull out the red and black wire attached to the white plug in on the bottom side of the circuit board.
[* greenred] Use the precision tweezers to gently pull out the red and black wire attached to the white plug in on the bottom side of the circuit board.

Bild 3

Alte Version

Neue Version