Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Blake Klein -

Bearbeitung genehmigt von Blake Klein

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Lift the battery compartment out of the controller and gently set it outside of the controller.
-[* icon_note] Do ++not++ yank, stress, or pull on the wires for removal.
-[* red] Use the precision tweezers to gently pull out the red and black wire attached to the white plug in on the bottom side of the circuit board.
+[* black] Lift the battery compartment out of the controller and set it outside of the controller.
+ [* icon_caution] Do not yank, stress, or pull on the wires for removal.
+[* red] Use the precision tweezers to pull out the red and black wire attached to the white plug at the bottom side of the circuit board.