Änderungen an Schritt Nr. 3
Bearbeitet von Adam O'Camb –
Bearbeitung genehmigt von Adam O'Camb
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Locate the rubber grip on the left side of the camera. Using a metal spudger, pry the rubber grip off of the casing. | |
| - | [* black] ***CAUTION*** be careful not to rip the rubber with the metal spudger. |
| - | [* black] Remove the five silver screws underneath the grip. |
| - | [* black] • 5.83mm silver x1 DL Flap • 5.85mm silver x4 underflap |
| + | [* icon_caution] Be careful not to rip the rubber with the metal spudger. |
| + | [* red] Remove the five silver screws underneath the grip. |
| + | [* black] One 5.83mm silver DL Flap |
| + | [* black] Four 5.85mm silver under flap |