Änderungen an Schritt Nr. 7
Schritt-Zeilen
| - | [* red] Remove the five ribbon connectors along the bottom of the assembly using either needle nose tweezers or a plastic opening tool to flip the small flaps to the "up" position. |
|---|---|
| + | [* red] Remove the five ribbon connectors along the bottom of the assembly using either needle nose [product|IF145-020|tweezers] or a plastic opening tool to flip the small flaps to the "up" position. |
| [* black] Use a nylon spudger to pull each ribbon connector out of its connection using the hole in the center of the ribbon. |