Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Keegan Lapham -

Bearbeitung genehmigt von Keegan Lapham

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Rotate the computer so the keyboard is facing upright.
[* black] Wedge the spudger in between the keyboard and the edges of the laptop.
-[* black] As you work around the seam between the keyboard and bottom casing, carefully pop apart each plastic tab that holds the two parts together.
+[* black] Pop apart the plastic tabs holding the keyboard and the bottom casings together.
[* black] Remove the whole keyboard once the edges are up.
-[* icon_caution] Be gentle when pulling the keyboard up. There are three pieces of tape connecting the keyboard to the bottom of the frame that you do not want to damage.
+[* icon_caution] When pulling the keyboard up, make sure to not disconnect the three pieces of tape connecting the keyboard to the bottom frame.