Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Blake Klein -

Bearbeitung genehmigt von Blake Klein

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Rotate the computer so the keyboard is facing upright.
-[* black] Wedge the plastic opening tool between the keyboard and the edges of the laptop.
-[* black] Pop apart the plastic tabs holding the keyboard and the bottom casings together.
-[* black] Remove the whole keyboard once the edges are up.
-[* icon_caution] When pulling the keyboard up, make sure to not disconnect the three pieces of tape connecting the keyboard to the bottom frame.
+[* black] Flip the laptop over and open it up.
+[* black] Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.
+[* black] Lift up the keyboard.
+[* icon_note] Ribbon cables still connect the two pieces.