Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Blake Klein -

Bearbeitung genehmigt von Blake Klein



-[* black] Disconnect the ZIF (zero insertion force) connector on the end. These usually have a tiny tab or flap that needs to be flipped up or pushed out before the cable can be safely removed.
-[* black] Disconnect the tape from the board connection slot using precision tweezers.
+[* red] Use a spudger to flip up the retaining flaps on the keyboard ribbon cable [guide|25629|ZIF|stepid=64969] sockets.
+[* black] Pull up the ribbon cables from their sockets.