Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Christopher Tran -

Bearbeitung genehmigt von Christopher Tran

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Turn the system-board assembly over and place it on a flat and clean surface.
-[* blue] In sequential order (indicated on the heat sink), loosen the captive screws that secure the heat-sink assembly to the system board.
+[* blue] In sequential order (indicated on the heat sink), loosen the (3) captive 5.5mm screws that secure the heat-sink assembly to the system board.
[* red] Disconnect the fan cable from the system board.
[* black] Lift the heat-sink assembly off the system board.